JL AUDIO XD 200/2V2

Item No. XD 200/2V2
JL AUDIO XD 200/2V2
price per Each
incl. tax
Stock 1-5
Each

Specifications

Description
JL AUDIO XD 200/2V2
QFC
8617
JL AUDIO XD 200/2V2

JL AUDIO XD 200/2V2

Item No. XD 200/2V2
price per Each
incl. tax
Stock 1-5
Each

Specifications

Description
JL AUDIO XD 200/2V2
QFC
8617

2-Channel Class D Full-Range Amplifier, 100 W x 2 @ 2 Ω / 75 W x 2 @ 4 Ω - 14.4V



This tiny amplifier packs a serious full-range punch, delivering a staggering 100 watts per channel into 2 ohms (14.4V, 1% THD). The breakthrough that makes this much power possible in such a small chassis is our NexDâ„¢ ultra-high-speed switching design, which allows for full bandwidth Class D operation with extremely low distortion and outstanding efficiency.

The XD200/2v2 includes a 12 dB / octave filter which can be configured as a low-pass or high-pass filter and offers continuously variable cutoff frequency selection from 50-500 Hz.

The XD200/2v2 also features the v2 Spec feature set, which consists of automatic turn-on capability (via signal sensing or DC-offset sensing), and a dual-range differential-balanced input section able to handle a wide range of input voltage levels. With the addition of an HD-RLC remote level control (sold separately), the amplifier's level can be directly controlled from the driver's seat.

This amplifier features a black powder-coat finish and a gasketed, brushed aluminum cover for the controls.

Rated Continuous (RMS) Power @ 14.4 V
@ 4 Ω75 W RMS x 2
@ 2 Ω100 W RMS x 2
Bridged @ 4Ω200 W RMS x 1
Rated Continuous (RMS) Power @ 12.5 V
@ 4 Ω60 W RMS x 2
@ 2 Ω90 W RMS x 2
Bridged @ 4Ω180 W RMS x 1
General Specifications
Frequency Response12 Hz - 22 kHz (+0, -1dB)
S/N Ratio, referred to highest rated power>104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
S/N Ratio, referred to 1 W>84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
Damping Factor @ 4 Ω>150 / 50 Hz
Damping Factor @ 2 Ω>75 / 50 Hz
THD+N @ Rated Power<1% @ 2 Ω per Ch.
Input Voltage Range @ RCA InputsSwitchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High)
Min.Copper Power / Ground Wire Gauge8 AWG wire
Fuse Rating20 A (AFS, AGU or MaxiFuseâ„¢)
Signal Processing
Filter Mode(s)Low-Pass or High-Pass
Filter Slope(s)12 dB/octave
Filter Frequency Range50 Hz - 500 Hz
Detented, Calibrated Filter Freq. PotentiometerYes
Filter Defeat FunctionYes
Remote Level ControlOptional (HD-RLC)
Security Cover for ControlsYes
Pass-Through Preamp OutputBuffered
Physical Specifications
Height (H)2.05 in / 52 mm
Width (W)6.85 in / 174 mm
Depth (D)7.09 in / 180 mm
Net Weight3.75 lb / 1.70 kg