Vehicle application:
 
Citroen
Citroen Jumper (250) 05/2014 - 10/2022
Citroen Jumper (250) 10/2022 - 2024
Citroen e-Jumper (259 10/2021 - 2024
Citroen Relay (250) 2006- 2024

Fiat
Fiat Ducato (ZAF 250) 05/2014 -11/2021

Opel
Opel Movano Cargo C (Y) 10/2021 - 01/2024
Opel Movano Cargo C (Y) 01/2024 - 2024
Opel Movano Electric Cargo C (Y) 10/2021 - 01/2024
Opel Movano Electric Cargo C (Y)  01/2024 - 2024

Peugeot
Peugeot Boxer (Y) 09/2014 - 12/2019
Peugeot Boxer (Y) 08/2018 - 2024
Peugeot e-Boxer (Y) 10/2021 - 2024

Following signals are provided:

Reimported vehicles or vehicles with different software may be incompatible in functions.

SWC
Note:

analog

connector: ISO / Mini ISO
connector: OEM SWC > 3,5mm Jack / loose wire

vehicles with open dash
vehicles with +12V ignition and analog SWC in Mini ISO connector Pin 10/11/12 SWC1/GND/SWC2

vehicles without OEM HU

in case of swappt SWC commands change connection of green/blue wire

vehicles with Daiichi OEM HU direct wired coloured cables:

check analog signals with OEM device before installation > item picture 2

Pin 3: GND park brake signal
Pin 4 speed pulse signal
Pin 5: +12V illumination clamp 58
Pin 8: SWC GND > connect GND clamp 31
Pin 9: Key 1 > connect blue
Pin 10: Key 2 > connect green
Pin 19: +12V reverse gear signal
Pin 28: GND mute signal
Pin 42: +12V ignition clamp 15

in case of swappt SWC commands change connection of green/blue wire
adaptation T-Harness Citroen/Dodge/Fiat/Jeep/Opel/Peugeot 52Pin > item: 57-1095

in case of trip odometer flashing additopnal:
SWC Citroen/Fiat/Opel/Peugeot VP1/VP2/Daiichi 52Pin > item: 42xfa019
dip switch position with Blue&Me > 1>OFF/2>OFF/3>ON//4>ON/OFF

dip switch settings for the retrofit device manufacturer (look into the manual)