Facia plate 1-DIN with HU connector kit SWC Fiat

Vehicle application:

Fiat 500 (ZAF 312) 10/2007 - 07/2015

Colour: black

Many car manufacturers install car specific head units to match the optic of the dashboard.

Installation kits include all components for replacing an OEM HU.

Depending on the vehicle's equipment, all adapters and interfaces required to operate the retrofit device and restore vehicle functions are included in the scope of delivery.

Please check the installation recommendations for the individual components.

In some cases, not all vehicle functions are supported.
For example, Trailer Assist, E Call or other driver assistance systems.

Please check the OEM HU and vehicle settings for available settings before installation.

Depending on the vehicle equipment as well as the range of functions and software of the retrofit HU, individual operating functions may be omitted or replaced by other functions.

Compare the pictured harness connectors with the connectors in your car and make sure that they fit optically and technically.

Also check if one of the listed OEM head units were installed originally.

Finally check vehicle functionality, vehicle settings and SWC functionality before final assembly.

Note:

CAN Bus

connector: ISO / Mini ISO
connector: OEM antenna ISO(m) > DIN(m)

vehicles with Blaupunkt / Delphi / VDO OEM HU
vehicles with CAN Bus in ISO Power connector

vehicles without analoge SWC in Mini ISO connector C-2
vehicles without Visteon / Daiichi / UConnect OEM HU

vehicles with Blue&Me > silverbox module must remain installed

blue: +12V Amp remote*

Following signals are provided:

Reimported vehicles or vehicles with different software may be incompatible in functions.

red: +12V ignition clamp 15
orange: +12V illumination clamp 58
purple/white: +12V reverse signal
pink: speed pulse signal
green: GND park brake signal

load capacity total outputs: 100 mA max.

current requirement more than 100 mA:
1 relay coil resistance 75 Ohm min.
2 relays coil resistance 150 Ohm min.

SWC

Scope of delivery:

1-DIN facia plate Fiat 500 10/2007-07/2015 black bulk > item: 281094-22-0
SWC Citroen/Fiat/Opel/Peugeot ISO CAN BUS/Mini ISO bulk > item: 42sfa004-0
SWC lead 42s/acv > Multilead different HU bulk > item: 42ctmultilead-0
Antenna adapter ISO(F)>DIN(m) 25cm bulk > item: 1503-00-0

Optional:

*Active system adapter Alfa Romeo/Lancia ISO>ISO > item: 13-1001-50

Many car manufacturers install car specific head units to match the optic of the dashboard.

Installation kits include all components for replacing an OEM HU.

Depending on the vehicle's equipment, all adapters and interfaces required to operate the retrofit device and restore vehicle functions are included in the scope of delivery.

Please check the installation recommendations for the individual components.

In some cases, not all vehicle functions are supported.
For example, Trailer Assist, E Call or other driver assistance systems.

Please check the OEM HU and vehicle settings for available settings bevore installation.

Depending on the vehicle equipment as well as the range of functions and software of the retrofit HU, individual operating functions may be omitted or replaced by other functions.

Compare the pictured harness connectors with the connectors in your car and make sure that they fit optically and technically.

Also check if one of the listed OEM head units were installed originally.

Finally check vehicle functionality, vehicle settings and SWC functionality before final assembly.

Note:

CAN Bus

connector: ISO / Mini ISO
connector: OEM antenna ISO(m) > DIN(m)

vehicles with Blaupunkt / Delphi / VDO OEM HU
vehicles with CAN Bus in ISO Power connector

vehicles without analoge SWC in Mini ISO connector C-2
vehicles without Visteon / Daiichi / UConnect OEM HU

vehicles with Blue&Me > silverbox module must remain installed

blue: +12V Amp remote*

Vehicle application:

Fiat 500 (ZAF 312) 10/2007 - 07/2015

Colour: black

Following signals are provided:

Reimported vehicles or vehicles with different software may be incompatible in functions.

red: +12V ignition clamp 15
orange: +12V illumination clamp 58
purple/white: +12V reverse signal
pink: speed pulse signal
green: GND park brake signal

load capacity total outputs: 100 mA max.

current requirement more than 100 mA:
1 relay coil resistance 75 Ohm min.
2 relays coil resistance 150 Ohm min.

SWC

Optional:

*Active system adapter Alfa Romeo/Lancia ISO>ISO > item: 13-1001-50