ACV 611320-14-1 / KAU10
Item No. 611320-14-1
1-DIN kit Audi A3 with pocket 2003 > Vehicle application: Audi A3 (type 8P) 05/2003 - 05/2012 2/3-door version Audi A3 Sportback (type 8PA) 09/2004 - 10/2012 4/5-door version Audi A3 (Typ 8P) 01/2008 - 03/2013 cabriolet Until autumn 2006 only for models with Symphony radio or RNS-E navigation !
Price £79.99
price per Each
incl. tax
Stock 1-5
Each
Description
1-DIN kit Audi A3 with pocket 2003 > Vehicle application: Audi A3 (type 8P) 05/2003 - 05/2012 2/3-door version Audi A3 Sportback (type 8PA) 09/2004 - 10/2012 4/5-door version Audi A3 (Typ 8P) 01/2008 - 03/2013 cabriolet Until autumn 2006 only for models with Symphony radio or RNS-E navigation ! Colour: black Note: CAN Bus connector: ISO / Mini ISO connector: 40 Pin Quadlock VAG connector: 2 channel / 4 channel OEM amplified system > RCA(m) front/rear vehicles with Blaupunkt / Matsushita / Grundig Chorus II / Concert II / Symphony II 1-DIN OEM HU wit vehicles with Blaupunkt / Matsushita / Grundig Chorus II / Concert II / Symphony II 2-DIN OEM HU vehicles with RNS-E 16:9 OEM Nav Sat vehicles without BNS 5.0 monochrome OEM Sat Nav* retrofit HU with pre amp power more than 3V retrofit HU with pre amp power less than 3V: SWC Audi A3 40Pin Quadlock Amp 2/4 channel > item: 42sad006 SWC Audi A3 ISO/Mini ISO Amp 2/4 channel > ietm: 42sad008 blue: +12V amplified system remote compatible with all vehicles from LFB Interface: SWC Audi A3 40Pin Quadlock Amp 2/4 channel> item: 42sad002 SWC Audi A3 ISO/Mini ISO Amp 2/4 channel > item: 42sad003
Specifications
- Description
- ACV 611320-14-1 / KAU10
- QFC
- QFC-20225
- Description2
- FULL FITTING KIT AUDI A3
ACV 611320-14-1 / KAU10
Item No. 611320-14-1
1-DIN kit Audi A3 with pocket 2003 > Vehicle application: Audi A3 (type 8P) 05/2003 - 05/2012 2/3-door version Audi A3 Sportback (type 8PA) 09/2004 - 10/2012 4/5-door version Audi A3 (Typ 8P) 01/2008 - 03/2013 cabriolet Until autumn 2006 only for models with Symphony radio or RNS-E navigation !
Price £79.99
price per Each
incl. tax
Stock 1-5
Each
Specifications
- Description
- ACV 611320-14-1 / KAU10
- QFC
- QFC-20225
- Description2
- FULL FITTING KIT AUDI A3
Facia plate 2-DIN with pocket and HU connector kit SWC Audi
Vehicle application:
Audi A3 (8P) 05/2003 - 04/2005
Audi A3 (8P) 10/2004 - 04/2013
Colour: black
Note:
CAN Bus
connector: ISO / Mini ISO
connector: 40 Pin Quadlock VAG
connector: 2 channel / 4 channel OEM amplified system > RCA(m) front/rear
connector: OEM antenna Fakra(m)(Set) > DIN(m)
blue: +12V antenna remote
blue: +12V amplified system remote
vehicles with Blaupunkt / Matsushita / Grundig Chorus II / Concert II / Symphony II 2-DIN OEM HU
vehicles with RNS-E 16:9 OEM Nav Sat
vehicles without BNS 5.0 monochrome OEM Sat Nav*
retrofit HU with pre amp output more than 3V
retrofit HU with pre amp output less than 3V:
SWC Audi A3/A4/A6/R8/TT 40Pin Quadlock Amp 2/4 channel > item: 42sad006
SWC Audi A3/A3/A4/A6/TT ISO/Mini ISO Amp 2/4 channel > ietm: 42sad008
Many car manufacturers install car specific head units to match the optic of the dashboard.
Installation kits include all components for replacing an OEM HU.
Depending on the vehicle's equipment, all adapters and interfaces required to operate the retrofit device and restore vehicle functions are included in the scope of delivery.
Please check the installation recommendations for the individual components.
In some cases, not all vehicle functions are supported.
For example, Trailer Assist, E Call or other driver assistance systems.
Please check the OEM HU and vehicle settings for available settings before installation.
Depending on the vehicle equipment as well as the range of functions and software of the retrofit HU, individual operating functions may be omitted or replaced by other functions.
Compare the pictured harness connectors with the connectors in your car and make sure that they fit optically and technically.
Also check if one of the listed OEM head units were installed originally.
Finally check vehicle functionality, vehicle settings and SWC functionality before final assembly.
Following signals are provided:
Reimported vehicles or vehicles with different software may be incompatible in functions.
red: +12V ignition clamp 15
orange: +12V illumination clamp 58
purple/white: +12V reverse gear signal
green: GND park brake signal
load capacity total outputs: 100 mA max.
current requirement more than 100 mA:
1 relay coil resistance 75 Ohm min.
2 relays coil resistance 150 Ohm min.
SWC
OEM amplified system 2 channel / 4 channel
*vehicles with BNS 5.0 monochrome OEM Sat NavSWC Audi/Seat/Skoda/VW different vehicles 40Pin Quadlock > item: 42a-1324-001
Vehicle application:
Audi A3 (8P) 05/2003 - 04/2005
Audi A3 (8P) 10/2004 - 04/2013
Colour: black
Note:
CAN Bus
connector: ISO / Mini ISO
connector: 40 Pin Quadlock VAG
connector: 2 channel / 4 channel OEM amplified system > RCA(m) front/rear
connector: OEM antenna Fakra(m)(Set) > DIN(m)
blue: +12V antenna remote
blue: +12V amplified system remote
vehicles with Blaupunkt / Matsushita / Grundig Chorus II / Concert II / Symphony II 2-DIN OEM HU
vehicles with RNS-E 16:9 OEM Nav Sat
vehicles without BNS 5.0 monochrome OEM Sat Nav*
retrofit HU with pre amp output more than 3V
retrofit HU with pre amp output less than 3V:
SWC Audi A3/A4/A6/R8/TT 40Pin Quadlock Amp 2/4 channel > item: 42sad006
SWC Audi A3/A3/A4/A6/TT ISO/Mini ISO Amp 2/4 channel > ietm: 42sad008
Many car manufacturers install car specific head units to match the optic of the dashboard.
Installation kits include all components for replacing an OEM HU.
Depending on the vehicle's equipment, all adapters and interfaces required to operate the retrofit device and restore vehicle functions are included in the scope of delivery.
Please check the installation recommendations for the individual components.
In some cases, not all vehicle functions are supported.
For example, Trailer Assist, E Call or other driver assistance systems.
Please check the OEM HU and vehicle settings for available settings before installation.
Depending on the vehicle equipment as well as the range of functions and software of the retrofit HU, individual operating functions may be omitted or replaced by other functions.
Compare the pictured harness connectors with the connectors in your car and make sure that they fit optically and technically.
Also check if one of the listed OEM head units were installed originally.
Finally check vehicle functionality, vehicle settings and SWC functionality before final assembly.
Following signals are provided:
Reimported vehicles or vehicles with different software may be incompatible in functions.
red: +12V ignition clamp 15
orange: +12V illumination clamp 58
purple/white: +12V reverse gear signal
green: GND park brake signal
load capacity total outputs: 100 mA max.
current requirement more than 100 mA:
1 relay coil resistance 75 Ohm min.
2 relays coil resistance 150 Ohm min.
SWC
OEM amplified system 2 channel / 4 channel
*vehicles with BNS 5.0 monochrome OEM Sat NavSWC Audi/Seat/Skoda/VW different vehicles 40Pin Quadlock > item: 42a-1324-001