ACV 621320-19-1 / KAU03
Item No. 621320-19-1
Price £104.99
price per Each
incl. tax
Stock 1-5
Each
Specifications
- Description
- ACV 621320-19-1 / KAU03
- QFC
- QFC-20225
- Description2
- FULL FITTING KIT AUDI TT (8J)
ACV 621320-19-1 / KAU03
Item No. 621320-19-1
Price £104.99
price per Each
incl. tax
Stock 1-5
Each
Specifications
- Description
- ACV 621320-19-1 / KAU03
- QFC
- QFC-20225
- Description2
- FULL FITTING KIT AUDI TT (8J)
Radio panel with 2-DIN installation cutout
Suitable for the following vehicles: Audi TT (8J) 04/2006 - 04/2010 Audi TT (8J) 08/2010 - 03/2014 Coluor: blackÂ
Â
Optional:
Â
Storage compartment for 2-DIN radio panel/1-DIN radio panel: 271000-05
2-DIN radio panel ISO universal/113mm x 183mm: 381320-00Â Steering wheel remote control adapter Audi
Keep the original steering wheel remote control functions when replacing the factory radio with an aftermarket radio.
Depending on the vehicle equipment and the range of functions and software of the aftermarket device, individual operating functions may be omitted or replaced by other functions.
Compare the adapter plugs shown with those in your vehicle and make sure that they fit visually and technically.
Please also check whether one of the specified original factory radios was installed in your vehicle.
Before final assembly, check vehicle functions, vehicle settings and steering wheel remote control for functionality.
Our support team will be happy to help you with the selection.
02431-9645-96
support@acvgmbh.de
Note:
CAN Bus Connection: 40 Pin Quadlock VAG connector
Connection: 2 channel / 4 channel OEM sound system > Cinch(m) front/rear If the Audi connector variant is unknown > Article: 42sad00c with ISO/Mini ISO and 40 pin Quadlock wiring harness Vehicles with Blaupunkt / Matsushita / Grundig Concert II / Symphony II / Chorus II 2-DIN OEM device
Vehicles with RNS-E 16:9 OEM navigation Vehicles without Bosch BNS 5.0 Monochrome OEM Navigation* Retrofit devices with preamplifier output power greater than 3V** blue: +12V Amp Amplifier Remote
The following signals are provided: Reimported vehicles or vehicles with different software may be functionally incompatible. red: +12V ignition terminal 15
orange: +12V lighting terminal 58
purple/white: +12V reversing signal
green: ground GND handbrake signal Total output load capacity: 100 mA max. Current requirement greater than 100 mA:
1 relay coil resistance 75 Ohm min.
2 relays coil resistance 150 Ohm min. Steering wheel remote control OEM sound system 2 channel / 4 channel
Suitable for the following vehicles: Audi TT (8J) 04/2006 - 04/2010 Audi TT (8J) 08/2010 - 03/2014 Coluor: blackÂ
Â
Optional:
Â
Storage compartment for 2-DIN radio panel/1-DIN radio panel: 271000-05
2-DIN radio panel ISO universal/113mm x 183mm: 381320-00Â Steering wheel remote control adapter Audi
Keep the original steering wheel remote control functions when replacing the factory radio with an aftermarket radio.
Depending on the vehicle equipment and the range of functions and software of the aftermarket device, individual operating functions may be omitted or replaced by other functions.
Compare the adapter plugs shown with those in your vehicle and make sure that they fit visually and technically.
Please also check whether one of the specified original factory radios was installed in your vehicle.
Before final assembly, check vehicle functions, vehicle settings and steering wheel remote control for functionality.
Our support team will be happy to help you with the selection.
02431-9645-96
support@acvgmbh.de
Note:
CAN Bus Connection: 40 Pin Quadlock VAG connector
Connection: 2 channel / 4 channel OEM sound system > Cinch(m) front/rear If the Audi connector variant is unknown > Article: 42sad00c with ISO/Mini ISO and 40 pin Quadlock wiring harness Vehicles with Blaupunkt / Matsushita / Grundig Concert II / Symphony II / Chorus II 2-DIN OEM device
Vehicles with RNS-E 16:9 OEM navigation Vehicles without Bosch BNS 5.0 Monochrome OEM Navigation* Retrofit devices with preamplifier output power greater than 3V** blue: +12V Amp Amplifier Remote
The following signals are provided: Reimported vehicles or vehicles with different software may be functionally incompatible. red: +12V ignition terminal 15
orange: +12V lighting terminal 58
purple/white: +12V reversing signal
green: ground GND handbrake signal Total output load capacity: 100 mA max. Current requirement greater than 100 mA:
1 relay coil resistance 75 Ohm min.
2 relays coil resistance 150 Ohm min. Steering wheel remote control OEM sound system 2 channel / 4 channel