SPEAKER / SUBS / AMPS » AMPS/EQ » FOCAL » FOCAL FPX51200 5-CHANNEL AMP

FOCAL FPX51200 5-CHANNEL AMP

RRP: £599.99

Login for trade price

1-5 In Stock

Description:

TECHNICAL SPECIFICATIONS

Class D amplifier - 5/4/3 channels
CEA power (4 ohms):
4 x 75Wrms + 1 x 420Wrms
Power max (2 ohms):
4 x 120Wrms + 1 x 720Wrms
Power max (channels 1 to 4 bridged at 4 ohms) + channel 5 at 2 ohms: 2 x 240Wrms + 720Wrms
Bandwidth: 10Hz - 20kHz
Total harmonic distortion: < 0.03%
SNR (1W/A): > 75 dB
High-Pass / Low-Pass filters channels 1 to 4: 50Hz – 500Hz
Channel 5 (Subwoofer): Subsonic filter
(High-pass) 10Hz - 50Hz +
Low-pass filter 50Hz - 250Hz
Channel 5 Bass-Boost : 45Hz / 0 to 12dB
Phase adjustable from 0 to 180° for channel 5
Copy mode: (6 CH/4 CH/2 CH)
Full range mode
Protection: Short circuit / low impedance /
reverse polarity / DC / power drop /
heat protection
Dimensions (L x H x W): 1317/64" x 21/4" x 657/64"
(337 x 175 x 57mm)
Weight: 9 lbs (4,1kg)
Key features of the FPX 5.1200
?Only one amplifier for the entire hi-fi installation
?Easier to integrate and install
?Compact design
?Substantial power and great musicality
?Extremely versatile
?A dedicated subwoofer channel (+ remote control)

Read more +

Info:

Department SPEAKER / SUBS / AMPS
Category AMPS/EQ
Brand FOCAL
Lookup FPX51200
Barcode 3544050750685
Weight 4.85 kg
QFC 17201

5-CHANNEL AMPLIFIER - 4 X 120 WATTS

5-channel FPX 5.1200 amplifier has a maximum power of 4 x 120 Watt + 1 x 720 Watt at 2 Ohms!

The input selector (2/4/6 channels) duplicates channels, meaning there will always be 5 output channels, even if the head unit only has one or two stereo outputs.

To perfectly tune the subwoofer to the rest of the installation, the bass channel has a low-pass active crossover, a bass equaliser, phase adjustment and a subsonic filter (particularly useful for cutting off frequencies which are too low for a small subwoofer). The remote control enables you to adjust the bass level from the driving seat depending on the type of music you’re listening to.

Stable at 4 and 2 Ohms, this new FPX amplifier will drive most speaker drivers on the market with just the right amount of power: 4 x 75 Watts + 1 x 420 Watts RMS at 4 Ohms (CEA standard). With its power and contained volume, FPX 5.1200 makes the installation easier in order to make the most of your boot space.

KEY FEATURES

• D Class amplifier - 5 output channels
• Stable under 2 ohms
• High power and dynamic reserve (1 200W max.)
• Audio Mos-Fets - Optimized efficiency
• Subwoofer remote control supplied
• Input selector (2/4/6 channels)
• Adjustable active crossover for each pair of channels
• Dimensions: 13.25″ x 6.8″ x 2.25″ (337 x 175 x 57mm)


SPECIFICATIONS
Diameter 6½" (165mm)
Voice coil diameter 19/16"(40mm)
Voice coil height 02/3"(16.5mm)
Motor Magnet
Tweeter TKMX
Cone Composite K2 Power "W" sandwich cone
Surround Tuned Mass Damper (TMD®
Separated Crossover 6-12/12/12dB (3/4/500Hz/3.5kHz)
Tweeter Adjustable level +3; 0; -3dB/oct
Nom.power 120W RMS
Sensitivity (2.83V/1m) 93dB
Frequency Response 45Hz- 22kHz
Impedance 4 Ω
Accessories Supplied grilles and midbox

Back to top

Page View

Top▲